3' x 3' Target

Our durable handmade targets features a white center stripe made from a fine nylon mesh, which is quiet when the ball strikes it. The black outer stripes are made from a heavy black tarpaulin material, which makes an audible "pop" when contacted. The target provides the golfer with instant audible shot feedback without the golfer needing to look up to see where his or her ball went. If the shot is quiet, the ball hit the center strip. If the shot makes a pop, the shot is off-line. Features a heavy duty machine-stitched webbing border with cleated brass grommets at the top for easy installation into your cage.

3' x 3' Delta Target

This target is hand made from the same material used in our very best impact panels, and also in our golf simulator cages. The Delta material is very quiet upon impact, and will outlast almost any other material used in golf cages today. Features a heavy duty machine-stitched webbing border with cleated brass grommets at the top for easy installation into your cage.

Available in green or black (specify at checkout)

Polycarbonate Frame Corner Kit

This fitting kit is an economical way to set up your golf cage framework. These engineered polycarbonate fittings are lightweight, strong, and impervious to the elements. In testing, the tubing would typically fail before we could get a fitting to break. The kit includes all 8 corner fittings needed, self-tapping screws, and instructions to help you get started. You will need to supply 1-3/8" galvanized tubing, or equivalent. 1-3/8" galvanized tubing is more than twice as strong as 1" EMT conduit, and more than 3 times as strong as 3/4" EMT conduit. Since this tubing is commonly used as the top rail for chain link fencing, you can find it at your local home improvement store such as Lowe's™ or Home Depot™, or you can source it through your local fencing supplier.

Cast Aluminum Frame Corner Kit

This upgraded fitting kit is ideal for those who need a strong framework, but may need to take it down periodically. These cast aluminum fittings have been designed to be strong, incorporating extra webbing at the corners, and integral ribs to provide lateral strength. This is the perfect option for trade show use, and an excellent choice for indoor or outdoor golf cages. This kit includes all the fittings, set screws, hex key, and instructions you'll need to set up your frame. You will need to supply 1-3/8" galvanized tubing, or equivalent. 1-3/8" galvanized tubing is more than twice as strong as 1" EMT conduit, and more than 3 times as strong as 3/4" EMT conduit. Since this tubing is commonly used as the top rail for chain link fencing, you can find it at your local home improvement store such as Lowe's™ or Home Depot™, or you can source it through your local fencing supplier.

Tubing Only for 1 3/8" Frame Kits

This 22 piece pole kit is designed for use with either the polycarbonate or aluminum frame kits. The 5' tubing sections are 1-3/8" (32mm) O.D. black powder coated steel - ideal for those who need a strong frame, but may need to take it down periodically. Button type spring pins make assembly a snap! Includes a 25 pack of tension sleeves to ensure a snug fit. Assembled frame size is 10'x10'x10.

Institutional Pole Kit

Our 22 piece Institutional pole kit uses bigger diameter tubing for large golf cages and heavy duty applications. The 5' tubing sections are 1-5/8" (42mm) O.D. black powder coated steel and are designed for use with our heavy duty welded steel fittings. Button type spring pins make assembly a snap! This is the same tubing we use for our commercial grade batting cages, and is used in many custom cage applications as well.

Golf Cage Stake-Down Kit

If your golf cage is going to be exposed to any amount of wind or inclement weather, we strongly suggest securing your cage down with this kit. The stakes have been designed with special bends and kinks to resist pulling out of the ground. Includes 100' of black poly rope and carabiner clips for easy attachment.

**We strongly recommend that you always remove netting from the frame if you expect high winds. Netting will act like a sail in windy conditions, causing damage to the netting, the frame, or both.

Cage Hanger Kit (50 pack)

These cage hanger kits are a great option when you need to set up and take down the net periodically. They easily allow for tension adjustment and the spring loaded clip makes removal and reinstall simple and quick. Kit Includes 50 nylon ropes and 50 carabiners.

Carabiner 50 Pack

These carabiners are a great option for use when you need to take the net up and down periodically.

The spring loaded clip makes removal and reinstall simple and quick.

Pulleys

These pulleys have multiple uses for golf cage and/or netting installation. Attach these to your cage and suspend from cables to create a system that allows you to slide the cage out of the way when not in use. Or, use multiple pulleys where you need to lift a panel or cage vertically. Features a 1-1/4" sheave that will accept 1/8" through 5/16" rope or cable. Zinc galvanized finish. Package of 10.

Bungee Loops

Our 6" ball-end bungee loops are a great way to quickly fasten a netting panel to your framework. These work especially well with the Delta panels, or any panel that has a webbing border and grommets. May also be used with rope borders. Color: Black

Golf Cage Foam Floor Kits

Golf cage floor covering packages are recommended for indoor and outdoor use. Easy to install and remove for cleaning, floor padding helps prevent damage to balls and flooring. Not for use with spikes. Custom sizing available.

Colors Combinatios: Black/Grey, Blue/Green, Red/White